«Prev Discovery….Next Discovery»….^List of Discoveries
with Larry House, Tom Walker and Chuck Robinson
Slideshow
Click any photo below to manually sequence through the gallery.
-
- Tracing a pattern of the master
-
- Sealing the tang hole with tape
-
- Centering the master in the casing
-
- Ready to pour the rubber mold
-
- Pouring
-
- Pour complete
-
- Pouring the wax
-
- Pouring out excess wax
-
- Wax pour complete
-
- Removing the wax pattern from the mold
-
- Pattern sectioned to show hollow
-
- Attaching the sprew
-
- Attaching the pattern to the sprew
-
- Charging the crucible with copper
-
- Charge melting
-
- Adding the aluminum
-
- Stirring with a carbon rod
-
- Fluxing
-
- Results of the initial firing
-
- Second firing of the alloy
-
- Removing the crucible
-
- Pouring the ingots
-
- Final melting of the alloy
-
- Investment heating in kiln
-
- View down sprew hole
-
- Mould ready for pour
-
- Pouring the casting
-
- Pour complete
-
- Casting cooling
-
- Hosing out the investment
-
- Casting complete
GCBA has adopted the 
Gulf Coast Blacksmith Association 