https://gulfcoastblacksmith.com/contact/https://gulfcoastblacksmith.com/wp-content/uploads/2011/04/feeding-the-coupola.jpgFEEDING THE CUPOLAFEEDING THE CUPOLAhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/question-mark.jpgquestion-mark2023-08-27T05:21:45+00:00weekly0.6https://gulfcoastblacksmith.com/events/https://gulfcoastblacksmith.com/wp-content/uploads/2009/03/brice-nash-steak-turner.jpgBrice Nash Steak turnerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/03/eds-meeting.jpged's meetinghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/03/delph-men.jpgdelph-menhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0089.jpgPeter Renzetti's Puddled People - Figures are about 1" highPeter Renzetti's Puddled People - Figures are about 1" highhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0088.jpgBall made of linked Puddled PeopleBall made of linked Puddled Peoplehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0087.jpgDescription of Puddled People figures and ball by Peter RenzettiDescription of Puddled People figures and ball by Peter Renzettihttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0086.jpgDoor Knocker made at earlier ABANA ConferenceDoor knocker made at earlier ABANA Conferencehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0085.jpgChest made by POMMS at ABAMA 2004Chest made at ABANA 2004 Conferencehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0084.jpgInside cover of chest made at ABANA 2004 ConferenceInside cover of chest made at ABANA 2004 Conferencehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/img_0090.jpgPuddled People - Note letter head in back ground.Puddled People. Note letter head in background.2021-08-15T12:50:52+00:00weekly0.6https://gulfcoastblacksmith.com/upcoming-events/2021-08-15T12:36:55+00:00weekly0.6https://gulfcoastblacksmith.com/previous-meetings/https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/img_2526.jpgIMG_2526https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/img_2616.jpgIMG_2616https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/img_2572.jpgIMG_2572https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/sid-demo2.jpgSid-Demo2https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/sid-demo1.jpgSid-Demo1https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/phil-betty2.jpgPhil-Betty2https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/phil-betty1.jpgPhil-Betty1https://gulfcoastblacksmith.com/wp-content/uploads/2013/08/buddy-plaque.jpgBuddy Plaquehttps://gulfcoastblacksmith.com/wp-content/uploads/2013/08/chuck-plaque.jpgChuck Plaquehttps://gulfcoastblacksmith.com/wp-content/uploads/2013/08/july-meeting-3.jpegJuly Meeting 32021-03-22T15:15:01+00:00weekly0.6https://gulfcoastblacksmith.com/about/https://gulfcoastblacksmith.com/wp-content/uploads/2008/12/img_2064.jpgIMG_2064https://gulfcoastblacksmith.com/wp-content/uploads/2008/12/img_2526.jpgIMG_2526https://gulfcoastblacksmith.com/wp-content/uploads/2013/06/chuck.jpgchuckhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/larry-house.jpgLarry Househttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/dsc_15821.jpgChuck RobinsonChuck Robinsonhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/abana-movinglogosm.gifabana.movinglogosmhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/abana_logo.gifABANA_logohttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/buddys-shop-2.jpgbuddys.shop.2https://gulfcoastblacksmith.com/wp-content/uploads/2008/12/chuck-robinson-2.jpgChuck Robinsonhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/dsc_28061.jpgSid Gale2019-09-01T19:17:04+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-mug-shots/https://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7647.jpgLarry EalyLarry Ealyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7189-e1315166125727.jpgTom StieglerTomhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7185-e1315166024752.jpgMelinda McElveenMelindahttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7181-e1315165969777.jpgDaniel CutlerDanielhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7180-e1315166255846.jpgJacob CutlerJacobhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7175.jpgLyndon CutlerLyndonhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7192-e1315165871273.jpgCaleb StieglerCalebhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_7012-e1314899369261.jpgMark HaddixMark https://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_6980-e1306991578225.jpgBethany CreelBethanyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_6982-e1306991505534.jpgBen InabinetteBen2019-01-23T03:54:47+00:00weekly0.6https://gulfcoastblacksmith.com/about/larryhouse/2017-09-25T03:38:29+00:00weekly0.6https://gulfcoastblacksmith.com/how-to-join/2017-01-18T11:07:42+00:00weekly0.6https://gulfcoastblacksmith.com/market/2016-03-05T19:01:21+00:00weekly0.6https://gulfcoastblacksmith.com/retrospective/https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/104.jpg104https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/94.jpg94https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/85.jpg85https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/84.jpg84https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/82.jpg82https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/81.jpg81https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/80.jpg80https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/79.jpg79https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/78.jpg78https://gulfcoastblacksmith.com/wp-content/uploads/2014/10/70.jpg702015-11-02T00:44:52+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-news/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/girl1-e1258720937370.jpgCropped at 1:1Cropped at 1:1https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/girl-2.jpgOriginal aspect ratio and resolutionOriginal aspect ratio and resolution2015-11-02T00:24:26+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/gallery2/2015-01-18T03:14:09+00:00weekly0.6https://gulfcoastblacksmith.com/projects/2014-10-02T04:54:01+00:00weekly0.6https://gulfcoastblacksmith.com/links/2014-01-21T04:03:31+00:00weekly0.6https://gulfcoastblacksmith.com/2010/11/19/gcba-update/2014-01-19T18:30:24+00:00monthlyhttps://gulfcoastblacksmith.com/member-demonstration-events/boy-scouts-celebrate-100-years/https://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn12391.jpg3 of 15Wayne Cash transforming double head nails into swordshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1257.jpg13 of 15Chuck explains knife making to scouts and dadshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1255.jpg1 of 15Blacksmith shop at Avondale Scout Reservationhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1253.jpg6 of 15Knives always a draw a crowdhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1251.jpg11 of 15Our Mascot watches over Chuck and friendshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1249.jpg14 of 15Jay Barksdale, Dennis Rohner, Sid Gale, Glenn Wesley, Chuck Robinson, Tom Flynn, Norbert Delph, Wayne Cashhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1246.jpg15 of 15Scout Leaders present plaque to Gulf Coast Blacksmith teamhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1245.jpg5 of 15Many Scout familes were interested in Blacksmithinghttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1244.jpg8 of 15Scouts inspecting sample workhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/10/dscn1243.jpg12 of 15Wayne demonstrates making a twist2013-11-29T19:00:57+00:00weekly0.6https://gulfcoastblacksmith.com/library/https://gulfcoastblacksmith.com/wp-content/uploads/2008/12/tom-walker-e1275483869515.jpgTom Walkerhttps://gulfcoastblacksmith.com/wp-content/uploads/2008/12/dsc_2801.jpgGlen WesleyGlen Wesley2013-05-29T15:32:20+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/february-2012-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7747.jpgHandle detailhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7744.jpgDSC_7744https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7742.jpgDSC_7742https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7738.jpgLarry Earley showing some of his customer samplesLarry Earley showing some of his customer sampleshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7735.jpgDSC_7735https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7731.jpgDSC_7731https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7730.jpgDSC_7730https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7727.jpgThe Forg annex was very busyThe Forg annex was very busyhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7725.jpgDSC_7725https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7724.jpgDSC_77242012-12-16T22:55:57+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/april-2012-gcba-meeting/2012-12-16T22:55:55+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/july-2012-gcba-meeting-election-of-officers/2012-12-16T22:55:53+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-2011-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7361.jpgSteve forging a copper spoon restForging a copper spoon resthttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7360.jpgForging the depressions with a swedge blockForging the depressions with a swedge blockhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7358.jpgSmoking and blowingSmoking and blowinghttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7357.jpgDSC_7357https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7356.jpgDSC_7356https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7351.jpgSide viewSide viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7350.jpgBottom pivot mountBottom pivot mounthttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7348.jpgGlen demos the multipurpose arm and hand support.Glen demos the multipurpose arm and hand supporthttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7345.jpgGlen in actionGlen in actionhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7343.jpgPivot detailPivot detail2012-12-16T22:44:39+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/january-2012-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7640.jpgFullering a hammer headFullering a hammer headhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7637.jpgSlitting chisel pointSlitting chisel poinhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7636.jpgSide viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7623.jpgBrian's key ringBrian's key ringhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7622.jpgBrian's finished leafBrian's finished leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7618.jpgBrian forging a leafBrian forging a leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7616.jpgBrian Brazil demonstratingBrian Brazil demonstratinghttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7614.jpgTom's copper leavesTom's copper leaveshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7606.jpgTom Steigler's ForgedJewelryTom Steigler's ForgedJewelryhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7602.jpgDSC_76022012-12-16T22:39:35+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-2012-gcba-meeting/2012-12-04T03:33:09+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/august-2008/2012-12-04T03:24:45+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/fire-in-the-swamp-2012/https://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8325.jpgPreping the furnacePreping the furnacehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8324.jpgPewter ClassPewter Classhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8322.jpgSoap stone moldSoap stone moldhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8320.jpgDSC_8320https://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8319.jpgThe Teacher-Clayton BaineThe Teacher-Clayton Bainehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8316.jpgForge build completeForge build completehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8314.jpgTom Building Aristotle Forge to make high Carbon SteelTom Building Aristotle Forge to make high Carbon Steelhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8311.jpgDSC_8311https://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8310.jpgDSC_8310https://gulfcoastblacksmith.com/wp-content/uploads/2012/04/dsc_8307.jpgBuild progressingBuild progressing2012-12-01T15:38:33+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/aboretum-forge-day-january-2012/https://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7650.jpg14 of 16Hunter mans Chuck's blowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7693.jpg1 of 16Portable propane tempering righttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7692.jpg2 of 16One alumina brick forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7688.jpg3 of 16Mini keg forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7686.jpg4 of 16Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7685.jpg6 of 16Norb and Phil repair a blowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7684.jpg15 of 16Folks checking out Phil's tablehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7681.jpg7 of 16Larry instructs a boy scouthttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7680.jpg8 of 16Boy scouts and instructorshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/02/dsc_7676.jpg9 of 16Randal observes Paul's grinding technique2012-12-01T15:37:45+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2008/2012-12-01T15:37:22+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/brian-brazeal-workshop-october-2012/https://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9207.jpgFinished hammer head and chiselsFinished hammer head and chiselshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9201.jpgFullering curved gougeFullering curved gougehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9196.jpgDSC_9196https://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9193.jpgIn useIn usehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9192.jpgGouge mandrelGouge mandrelhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9147.jpgSide view of hardySide view of hardyhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9141.jpgDrifting holeDrifting holehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9139.jpgDrifting a circular holeDrifting a circular holehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9136.jpgPunch platePunch platehttps://gulfcoastblacksmith.com/wp-content/uploads/2012/11/dsc_9127.jpgRectangular punch faceRectangular punch face2012-12-01T15:35:47+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/msu-iron-pour-2/2012-12-01T14:56:19+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/september-2011-blacksmithing-conference-in-granbergsdal-sweden/https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-040.jpgSweden September 2011 040https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-038.jpgSweden September 2011 038https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-037-e1328033133780.jpgSweden September 2011 037https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-036.jpgSweden September 2011 036https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-035.jpgSweden September 2011 035https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-034.jpgSweden September 2011 034https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-033.jpgSweden September 2011 033https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-032.jpgSweden September 2011 032https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-011.jpgSweden September 2011 011https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/sweden-september-2011-010.jpgSweden September 2011 0102012-12-01T14:56:03+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/chuck-robinsons-work/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7548.jpgChuck Robinson's Workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7541.jpgChuck Robinson's WorkNew Anvil Detailhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7334.jpgChuck Robinson's WorkSalt Bathhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7553.jpgChuck Robinson's WorkCable skinner / Lignum Vitae handlehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7136.jpgChuck Robinson's WorkDamascus blade / silver furniturehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7135.jpgChuck Robinson's WorkLive Oak handle / sheathhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7131.jpgChuck Robinson's WorkRose Damascus / Ebonyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7125.jpgChuck Robinson's WorkDamascus / silver hilt/ Live Oakhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7117.jpgChuck Robinson's WorkDamascus drop point with Bocote handlehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_7111.jpgChuck Robinson's WorkCable Damascus / Live Oak handle2012-07-16T13:43:09+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/the-village-blacksmith-2/2012-07-12T21:10:30+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/peter-rosss-keynote-address-at-the-1998-abana-conference/2012-07-12T21:10:27+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/ornamental-chasing-and-repousse-the-magic-of-sculpting-in-metal/2012-07-12T21:10:23+00:00weekly0.6https://gulfcoastblacksmith.com/library/online-videos/2012-05-09T21:05:55+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/august-2011-gcba-meeting-2/https://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7217.jpg2 of 11Norb Delph repairs another blowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7208.jpg3 of 11Garey Ford conducts a class for new membershttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7205.jpg1 of 11Scott and Phil sharpen a brushhog bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7203.jpg4 of 11Jakob conducts another class for new membershttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7201.jpg9 of 11Meat forkhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7199.jpg8 of 11Copper Pterodactylhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7198.jpg10 of 11Stake mandrelhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7197.jpg7 of 11Sid Gale junk arthttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7196.jpg5 of 11Tom Walker sculpturehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/09/dsc_7174.jpg11 of 11Iron in the Hat table2012-02-27T00:21:21+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/phil-love-demonstrates-at-metairie-school/https://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1847.jpg1 of 13Cooking Utensilshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1854.jpg10 of 13Showing the finished nailhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1848.jpg8 of 13Passing the finished leaf ringhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1859.jpg12 of 13Another group of studentshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn18661-e1327904156822.jpg13 of 13Curling the stem of the leaf key ringhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1858.jpg11 of 13Forging a leaf for another group of studentshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1852.jpg9 of 13Making a nailhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1846.jpg3 of 13Phil's products on displayhttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1845.jpg7 of 13More studentshttps://gulfcoastblacksmith.com/wp-content/uploads/2012/01/dscn1844.jpg6 of 13Marking the veins2012-02-26T23:11:45+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/2009-fire-in-the-swamp/https://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2780.jpg4 of 30Blade smithing class in sessionhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2773.jpg29 of 30Larry presented with vegetable chopper made by Chris Markshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2770.jpg30 of 30Gwendolyn presented with a beautiful bowl by Hopehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2764.jpg5 of 30Terrel Pickett teaching David Barbayhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2759.jpg7 of 30Tom's display tablehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2752.jpg8 of 30Hope's work in progresshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2751.jpg9 of 30Hope hard at workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2742.jpg28 of 30Chris Mark's bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2740.jpg12 of 30John's Fire Flowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/06/dsc_2719.jpg13 of 30Fire Flower in full bloom2012-02-26T22:53:08+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/paintings-and-sketches/https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/the-blacksmiths-shop-by-franc3a7ois-bonvin-1857.jpgThe Blacksmith's Shop, by François Bonvin, 1857https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/the-zulu-wars-a-zulu-blacksmith-forging-an-assegai.jpgA Zulu blacksmith forging an assegai, from The Zulu Wars, 1879https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/the-blacksmiths-forge-by-johannes-dircksz-van-oudenrogge-1647-oil-on-canvas.jpgThe Blacksmith's Forge, by Johannes Dircksz van Oudenrogge 1647, oil on canvashttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/a-village-blacksmith-by-george-clausen-1931-oil-on-canvas.jpgA Village Blacksmith, by George Clausen, 1931, Oil on Canvashttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/blacksmith-apprentice-in-colonial-williamsburg.jpgBlacksmith Apprentice in Colonial Williamsburghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/crop-for-discoveries.jpgArtist unknownhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/blacksmiths-cottage-in-sherwood-forest-by-tolouse-leplotte.jpgBlacksmith's Cottage in Sherwood Forest, by Tolouse Leplottehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/winter-blacksmith-by-h-hargrove-1982-oil-on-canvas.jpgWinter Blacksmith, by H. Hargrove (1982, oil on canvas)https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/nf0698_spreadingtree1.jpgNF0698_spreadingtree1https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/fantasy-blacksmith.jpgfantasy blacksmith2021-02-17T16:18:40+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/the-blacksmith-and-king-solomon/https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/the-iron-worker-and-king-solomon-by-christian-schussele-1876-painting.jpgThe Iron Worker and King Solomon, by Christian Schussele (oil on canvas, 1876)https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/divider-2.pngdivider-22019-03-11T13:54:11+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2011/https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7318.jpg5 of 16Tim's hammershttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7317.jpg6 of 16Tim's hold downhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7315.jpg2 of 16Sidhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7313.jpg7 of 16Tomhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7311.jpg8 of 16Tom' tablehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7310.jpg9 of 16Tom's Table, part 2https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7309.jpg10 of 16Sid's tractor arthttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7308.jpg11 of 16Sid's arthttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7307.jpg12 of 16Brenda showing Chuck's kniveshttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7306.jpg13 of 16Norbert chasing away Tom's customers2012-01-30T06:11:11+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/the-george-ohr-festival-2008/2011-11-21T14:28:49+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/bush-tractor-festival-2011/https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7281.jpg1 of 17https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7280.jpg2 of 17Buddy at the helmhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7278.jpg3 of 17Wayne forging a meat hookhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7276.jpg4 of 17Cane presshttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7273.jpg5 of 17Chicken hitches a ridehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7268.jpg6 of 17https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7267.jpg6 of 17https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7266.jpg8 of 17https://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7265.jpg9 of 17Rick Swenson Junk arthttps://gulfcoastblacksmith.com/wp-content/uploads/2011/11/dsc_7261.jpg10 of 17Boars head2011-11-21T14:26:34+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2010/https://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5708.jpg3 of 25Tom Walker in full regaliahttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5706.jpg24 of 25Tom, Shila and Jose at the dog showhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_56731.jpg4 of 25Tom explaining his workhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5711.jpg25of 25Contestants greet each otherhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5709.jpg18 of 25Costume photo shoothttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5694.jpg15 of 25Contact at full galluphttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5693.jpg16 of 25The joust beginshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5681.jpg6 of 25Sid Gale answers questionshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5679.jpg14 of 25Tim LeMien and Norbert Delph discuss techniquehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5677.jpg7 of 25Sid turning and burning2011-11-21T13:59:01+00:00weekly0.6https://gulfcoastblacksmith.com/misc-pages/flag-counter/2011-09-26T11:11:54+00:00weekly0.6https://gulfcoastblacksmith.com/misc-pages/9877-2/2011-09-17T16:23:47+00:00weekly0.6https://gulfcoastblacksmith.com/abana/2011-09-07T17:27:04+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/july-2011-gcba-meeting-2/https://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7095.jpg4 of 11Portable post visehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7092.jpg3 of 11Locking vise to the standhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7090.jpg2 of 11Stand set uphttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7082.jpg8 of 11Front viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7074.jpg7 of 11Sid's tractorhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7072.jpg9 of 11Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7071.jpg12 of 11Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7068.jpg10 of 11Sid's Road Runnerhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7067.jpg6 of 11Dennis' touch markhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7066.jpg5 of 11Dennis' Cristoven Cross2011-09-06T00:18:45+00:00weekly0.6https://gulfcoastblacksmith.com/smithy-shops/rob-whitehursts-photos-of-a-japanese-swordsmith/2011-09-01T14:32:19+00:00weekly0.6https://gulfcoastblacksmith.com/smithy-shops/rob-whitehursts-tour-of-a-vietnamese-smithy/https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-1141.jpg3 of 25Vietnamese blacksmith https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-1101.jpg15 of 25Scraping the bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-1081.jpg14 of 25Fitting handle to the tanghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0981.jpg16 of 25Draw filinghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0971.jpg13 of 25Forging the edgehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0961.jpg4 of 25Anvilhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0941.jpg5 of 25Forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0921.jpg7 of 25Forging a bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0861.jpg1 of 25Vietnamhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/blacksmith-takeouts-0841.jpg2 of 25Blacksmith shop2011-09-01T14:31:28+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/june-2011-gcba-meeting-2/https://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7036.jpg12 of 12 Tom mans the video libraryhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7032.jpg10 of 12Phil and Gale use a scrolling jighttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7031.jpg11 of 12Sven critiques Sid's techniquehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7028.jpg8 of 12Finished leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7027.jpg9 of 12Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7020.jpg6 of 12Veininghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7019.jpg5 of 12Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7018.jpg7 of 12Fullering the leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7017.jpg3 of 12Necking the stemhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/07/dsc_7016.jpg1 of 12Mark demos forging a leaf2011-08-01T00:42:08+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/may-2011/https://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6992.jpg1 of 6Jim and Steve Dungan forging a jack handlehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6991.jpg2 of 6Jakob forginghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6988.jpg3 of 6Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6986.jpg4 of 6Hot workhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6985.jpg5 of 6Randal in actionhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/06/dsc_6994.jpg6 of 6Who ever said blacksmiths can't multi-task?2011-07-31T23:51:49+00:00weekly0.6https://gulfcoastblacksmith.com/about/about-buddy/2011-07-09T11:46:44+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/pearl-fryar-topiary-sculpture-garden-bishopsville-sc/https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5221.jpg3 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5220.jpg4 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5217.jpg5 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5215.jpg1 of 35Pearl Fryarhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5213.jpg6 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5212.jpg7 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5209.jpg2 of 35https://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5206.jpg8 of 35About 6' tallhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5204.jpg9 of 35Bottle treehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/06/dsc_5203.jpg10 of 35Variation on a bottle tree2011-06-28T04:30:13+00:00weekly0.6https://gulfcoastblacksmith.com/misc-pages/2011-06-25T21:52:58+00:00weekly0.6https://gulfcoastblacksmith.com/contact/contact-gcba/2011-06-25T21:51:28+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/https://gulfcoastblacksmith.com/wp-content/uploads/2010/05/manuscript-pg2.jpgmanuscript.pg2https://gulfcoastblacksmith.com/wp-content/uploads/2010/05/manuscript-pg3.jpgmanuscript.pg3https://gulfcoastblacksmith.com/wp-content/uploads/2010/05/manuscript-pg1.jpgmanuscript.pg12011-06-25T21:48:40+00:00weekly0.6https://gulfcoastblacksmith.com/smithy-shops/2011-06-25T21:48:08+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/https://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0090.jpgPuddled People - Note letter head in back ground.Puddled People - Note letter head in back ground.https://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0088.jpgBall made of linked Puddled PeopleBall made of linked Puddled Peoplehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0087.jpgDescription of Puddled People figures and ball by Peter RenzettiDescription of Puddled People figures and ball by Peter Renzettihttps://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0086-e1283810279851.jpgDoor Knocker made at earlier ABANA ConferenceDoor Knocker made at earlier ABANA Conferencehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0085.jpgChest made by POMMS at ABAMA 2004Chest made by POMMS at ABAMA 2004https://gulfcoastblacksmith.com/wp-content/uploads/2010/09/img_0084.jpgIMG_0084 Chest made at ABANA 2004Note linkages to locking tabs at brass screws2011-06-25T21:47:28+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/2011-06-25T21:46:35+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/2011-06-25T21:46:04+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/2011-06-25T21:44:02+00:00weekly0.6https://gulfcoastblacksmith.com/about/liability-disclaimer/2011-06-25T21:17:12+00:00weekly0.6https://gulfcoastblacksmith.com/about/about-our-site/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/wordpress-logo-hoz-bg1.pngWordPresshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/wordpress-logo-stacked-rgb.pngwordpress-logo-stacked-rgbhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/tools.jpgtools2022-09-04T23:53:34+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/fire-in-the-swamp-2011/https://gulfcoastblacksmith.com/wp-content/uploads/2011/04/ben-tool-chest.jpeg45 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6399.jpg42 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6384.jpg44 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6372.jpg37 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6353.jpg40 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6345.jpg36 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6341.jpg41 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6336.jpg38 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6334.jpg18 of 45https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6333.jpg3 of 452011-06-07T02:35:29+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/al-bronze-casting-a-knife-handle-by-larry-house-tom-walker-and-chuck-robinson/https://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_30651.jpg31 of 31Casting completehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_30631.jpg30 of 31Hosing out the investmenthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3061.jpg29 of 31Casting coolinghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_30561.jpg27 of 31Pouring the castinghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3052.jpg25 of 31View down sprew holehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_30491.jpg26 of 31Mould ready for pourhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3048.jpg24 of 31Investment heating in kilnhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3045.jpg23 of 31Final melting of the alloyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3040.jpg20 of 31Second firing of the alloyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/08/dsc_3036.jpg18 of 31Fluxing2011-06-02T18:33:13+00:00weekly0.6https://gulfcoastblacksmith.com/2011/05/02/april-meeting-2011/https://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6950.jpg1 of 19Carbide reamerhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6948.jpg9 of 19Tang slot cutting toolhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6945.jpg11 of 19Full view of toolhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6943.jpg4 of 19Guard grinding jighttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6941.jpg5 of 19Silver guard held by jighttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6929.jpg19 of 19Handle clamp jighttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6928.jpg18 of 19Clamping bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6927.jpg16 of 19Placing blade in the jig after applying epoxy to tanghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6918.jpg17 of 19Handle in place before clampinghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/05/dsc_6917.jpg13 of 19Checking handle fit on hidden tang2011-06-01T21:21:48+00:00monthlyhttps://gulfcoastblacksmith.com/member-work-samples/glen-wesleys-work/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/glen-wesley-joinery.jpgglen-wesley-joineryMade in a Clay Spenser Joinery class at Campbell School in Brasstown, NChttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/g013.jpg2 of 10Grill work (full view)https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/g12.jpg3 of 10Grill work (close-up)https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/g014.jpg1 of 10Glen Wesley's grill work at Metairie Credit Union2011-05-19T00:28:43+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/carl-zvoneks-work/2011-05-19T00:26:23+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/buddy-leonards-work/2011-05-19T00:23:27+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/sid-gales-work/2011-05-19T00:22:40+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/danny-arnolds-work/2011-05-19T00:21:51+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/october-2011-gcba-meeting/2011-05-02T22:54:58+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-2011-gcba-meeting/2011-05-02T22:54:09+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/september-2011-gcba-meeting/2011-05-02T22:53:34+00:00weekly0.6https://gulfcoastblacksmith.com/misc-pages/how-to-make-any-web-page-easier-to-read/https://gulfcoastblacksmith.com/wp-content/uploads/2009/10/reading-glasses-728636.jpgLike reading glasses2011-05-02T11:59:48+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/february-2011-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6117.jpg4 of 15Norbert fixes a blowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6116.jpg11 of 15Post drill in Iron in the Hathttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6113.jpg5 of 15Garey demos his Mini Gas Forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6112.jpg8 of 15Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6111.jpg9 of 15Explaining the forging sequencehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6110.jpg7 of 15Larry forging door hookshttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6109.jpg3 of 15Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6108.jpg2 of 15Outside viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6107.jpg1 of 15Finishing up the annex windowshttps://gulfcoastblacksmith.com/wp-content/uploads/2011/03/dsc_6098.jpg13 of 15Punch anvil view2011-04-17T14:54:51+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/antique-fire-pot-restoration/https://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01249.jpg4 of 14Timber supports in placehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01245.jpg1 of 14Fire pot before the restorationhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01140.jpg12 of 14Tom Walker in actionhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01129.jpg13 of 14Stop droolinghttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01113.jpg14 of 14Part of the shop collectionhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01101.jpg11 of 14The Shophttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01097.jpg10 of 14Forge completedhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01083.jpg6 of 14Buggy spring modificationshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01081.jpg8 of 14The cast iron pot alone weights 150 lbs.https://gulfcoastblacksmith.com/wp-content/uploads/2010/04/dsc01074.jpg7 of 14Modified 55 gallon drum2011-03-12T21:36:39+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/january-2011-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6077.jpg8 of 9Wayne showes off his "carousel" tool wheelhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6069.jpg6 of 9Completed rough forginghttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6068.jpg7 of 9Finished and waxedhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6066.jpg2 of 9https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6065.jpg3 of 9https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6064.jpg4 of 9https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6063.jpg5 of 9https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6061.jpg1 of 9Ralph forging a horse head horse shoehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_6080.jpg9 of 9Iron in the Hat2011-03-03T02:51:51+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-2010-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5788.jpg1 of 22Jakob our newest instructorhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5787.jpg2 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5786.jpg3 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5782.jpg5 of 22Annex enclosure still unfinishedhttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5781.jpg10 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5779.jpg8 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5777.jpg9 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5775.jpg7 of 22https://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5767.jpg6 of 22Sequence showing Buddy Welding cablehttps://gulfcoastblacksmith.com/wp-content/uploads/2011/01/dsc_5761.jpg13 of 22Scarfing prior to welding2011-01-24T17:02:20+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/october-2010-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5576.jpg5 of 14Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5575.jpg6 of 14Larry works on back windowshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5574.jpg4 of 14Annex build continues—doors finishedhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5566.jpg3 of 14Buddy shows proper hammer controlhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5564.jpg2 of 14Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5563.jpg1 of 14Buddy demonstrates proper fire techniquehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5560.jpg7 of 14Gary Ford's newest cable knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5559.jpg8 of 14Gary Ford's cable knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5556.jpg9 of 14Sid Gale's chopperhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/11/dsc_5555.jpg10 of 14Another view2011-01-24T03:29:10+00:00weekly0.6https://gulfcoastblacksmith.com/discoveries-gallery/french-firescreen/https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/fsopendoors.jpg5 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreenopcup.jpg6 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreencup-2.jpg7 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreencup.jpg8 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreen-5.jpg2 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreen-4.jpg3 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreen-2.jpg4 of 8https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/firescreen.jpg1 of 82010-11-17T05:25:27+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-meeting-2008/2010-11-17T03:47:42+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/january-meeting-2009/2010-11-17T03:47:13+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/february-2009/2010-11-17T03:46:47+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/march-2009-meeting/2010-11-17T03:46:19+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/2009-gcba-conference-featuring-jim-batson/2010-11-17T03:45:43+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/may-2009-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24641.jpg6 of 14Wayne's Fleure de Lis finialhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24621.jpg14 of 14Mike's forged bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24611.jpg7 of 14Blow molded artifacthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24601.jpg8 of 14Wayne's repousse Fleure de Lishttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24591.jpg5 of 14Wayne forginghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24561.jpg10 of 14Initial weldhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24551.jpg9 of 14Dennis forging a piece of cablehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24531.jpg12 of 14Jakob forging a Menorahhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24521.jpg2 of 14Phil forginghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/05/dsc_24511.jpg13 of 14Mike forging a blade2010-11-17T03:45:22+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/june-2009/https://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28481.jpg4 of 9The new Generation, Jessehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28541.jpg9 of 9Dragon Flyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28521.jpg1 of 9Tim and Buddyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28511.jpg2 of 9The new Generation, Jeffreyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28501.jpg3 of 9The new Generation, Quinnhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28471.jpg5 of 9Phil and Renehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28451.jpg7 of 9Old French scroll workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_28431.jpg8 of 9Iron in the Hathttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2846.jpg6 of 9Glen working on a scroll2010-11-17T03:44:49+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/july-2009-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2945.jpg7 of 9Randal forging a RR Spikehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2943.jpg8 of 9Jakob and Aaron repairing the forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2942.jpg6 of 9Folks hard at workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2941.jpg9 of 9Dennis slitting a billethttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2922.jpg3 of 9Gary Ford Anvil Bucklehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2921.jpg4 of 9Dennis Rohner penny ear ringshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2920.jpg1 of 9The Gatheringhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2918.jpg2 of 9Gary Ford polishing a bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/07/dsc_2946.jpg5 of 9Ron Ryan's new knife2010-11-17T03:44:17+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/september-2009-monthly-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3125.jpg21 of 21Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3122.jpg3 of 21Billy Scafidel, our latest Honorary Memberhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3120.jpg17 of 21Management-labor disputehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3108.jpg5 of 21Close-up view of forge weldhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3106.jpg4 of 21Dennis demonstrating a forge weldhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3104.jpg9 of 21Hawkhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3102.jpg16 of 21Glen displays some of the library videoshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3100.jpg6 of 21Iron in the Hathttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3099.jpg12 of 21Some of Chuck's knifemaking hammers and tongshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3098.jpg11 of 21Side view2010-11-17T03:43:37+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/october-09-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2009/10/img_0004.jpg12 of 12Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/img_0003.jpg10 of 12Side Viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/img_0002.jpg9 of 12close uphttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/img_0001.jpg8 of 12John Perilloux's beautiful tablehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/img_0005.jpg11 of 12Iron in the hat itemshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3389.jpg1 of 12Ben's baptismhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3387.jpg2 of 12Norbert dressing a flatterhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3385.jpg3 of 12David's new chapeauhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3384.jpg4 of 12A smoky morninghttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dsc_3383.jpg5 of 122010-11-17T03:42:59+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/november-2009/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3750.jpg4 of 14Close uphttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3749.jpg3 of 14Alton shows his project, a squirrel cookerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3748.jpg6 of 14David Smith takes a turnhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3747.jpg2 of 14Alton Bakerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3746.jpg5 of 14Allen Lassere gets hot and dirtyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3745.jpg1 of 14Bull Sessionhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3744.jpg14 of 14Iron in the Hathttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3743.jpg11 of 14Twist Patternhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3742.jpg12 of 14Rose patternhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3741.jpg10 of 14Chuck Robinson's Damascus2010-11-17T03:42:35+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/january-2010/https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4087.jpg6 of 19Checking the fithttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4086.jpg5 of 19Using a scroll jighttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4080.jpg18 of 19Phil's copper dipperhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4078.jpg4 of 19Forging the scrollhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4073.jpg12 of 19Pokerhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4072.jpg11 of 19Other workhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4070.jpg15 of 19Rail anvilshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4069.jpg17 of 19Another view of blow-up sculptureshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4061.jpg8 of 19Glen shows some of his new workhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4060.jpg9 of 19An old scroll panel2010-11-17T03:42:12+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/february-2010-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4363.jpg3 of 28Cranking out a rose head nailhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4362.jpg2 of 28The usual suspectshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4359.jpg1 of 28A big turnout for the meetinghttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4347.jpg28 of 28Another beauty finishedhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4364.jpg4 of 28Using a nail headerhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4337.jpg5 of 28Gun barrel forgehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4335.jpg7 of 28Phil's copper oil lamphttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4334.jpg8 of 28Sid's fishhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4333.jpg9 of 28Close uphttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4332.jpg11 of 28Close up2010-11-17T03:41:24+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/march-2010-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44531.jpg6 of 18Bending side to improve initial fithttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44511.jpg7 of 18Fitting bottomhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44501.jpg5 of 18Plumber's solderhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44481.jpg12 of 18Soldering wick tubehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44451.jpg13 of 18Checking flap movementhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44441.jpg10 of 18Soldering handle rivetshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44431.jpg11 of 18Close-uphttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44411.jpg9 of 18Soldering bottomhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_44401.jpg8 of 18Tacking bottomhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/03/dsc_4479-e1272843596573.jpg2 of 18Tools required2010-11-17T03:40:51+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/may-2010/https://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5133.jpg31 of 34Knives by Joe Obrehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5130.jpg30 of 34Blades by Joe Obrehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5129.jpg33 of 34Ricasso setting tool by Mike Lamontehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5125.jpg34 of 34Hunter by Mike Lamontehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5123.jpg29 of 34Paper towel holder by Wayne Cashhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5121.jpg22 of 34Butt cap with braised anchor pinshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5119.jpg24 of 34Making tang extentionhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5118.jpg25 of 34Fitting tang extensionhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5116.jpg27 of 34Fitting two pieces of antlerhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/05/dsc_5115.jpg26 of 34Fitting brass spacer2010-11-17T03:40:11+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/august-2010-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5514.jpg11 of 17Wayne welds guide pieces on Jakob's sliding bolthttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5511.jpg8 of 17Buddy checks Jakob's progresshttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5509.jpg10 of 17Jakob rolls the hand piecehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5507.jpg9 of 17Jakob, following Buddy's instructions, forges a sliding bolt piecehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5504.jpg16 of 17Iron in the Hat conducted by Leroyhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5503.jpg6 of 17Deborah fullering the leaf stemhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5501.jpg4 of 17Wayne welding a door bracehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5500.jpg7 of 17Anabel forging a leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5494.jpg12 of 17Mike, Phill and Rene strengthen a door posthttps://gulfcoastblacksmith.com/wp-content/uploads/2010/08/dsc_5493.jpg14 of 17Larry cuts door frame 45 mitres2010-11-17T03:39:38+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/june-2010-gcba-meeting/2010-11-12T13:00:59+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/july-2010-gcba-meeting/https://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5413.jpg19 of 19Sid's Sunflowerhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5411.jpg12 of 19Tom helps Tammy forge a leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5406.jpg14 of 19Brian and Kevin forge a spike knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5403.jpg13 of 19Tammy forging her leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5401.jpg17 of 19Evan Morrellhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5399.jpg18 of 19Excellent formhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5397.jpg15 of 19Wayne forging a spike knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5396.jpg16 of 19Forging on a post anvilhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5394.jpg9 of 19Tom's copper leafhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/07/dsc_5391.jpg11 of 19Back view of leaf2010-11-12T12:53:29+00:00weekly0.6https://gulfcoastblacksmith.com/gcba-monthly-meetings/september-2010-monthly-meeting/2010-11-12T12:49:53+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/blacksmithing-at-the-picayune-arboretum-january-2010/https://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4153.jpg7 of 19Forging a tinehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4151.jpg6 of 19Phil forging a meat forkhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4146.jpg5 of 19Phil takes a turnhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4145.jpg18 of 19Norbert hard at ithttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4139.jpg12 of 19Forging the head using a nail heading toolhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4129.jpg16 of 19Drawing the temper on a bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4117.jpg4 of 19It was a cold dayhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4115.jpg14 of 19Paul LeBatard grinding a bladehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4107.jpg8 of 19Tim forging a stakehttps://gulfcoastblacksmith.com/wp-content/uploads/2010/02/dsc_4106.jpg13 of 19Norbert forging a square nail2010-11-09T17:49:46+00:00weekly0.6https://gulfcoastblacksmith.com/member-work-samples/scott-carnesis-work/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7318.jpg1 of 6https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7317.jpg2 of 6https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7316.jpg3 of 6https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7315.jpg4 of 6https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7314.jpg5 of 6https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/imgp7313.jpg6 of 62010-07-10T04:55:00+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/2007-conference-with-frank-turley/https://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0083.jpg10 of 10Uncoiling a garage door springhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0077.jpg8 of 10Frank's hot cuthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0051.jpg7 of 10Hot cut - rough forgedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0038.jpg2 of 10Frank showed us a series of warm up exerciseshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0017.jpg6 of 10Rhys AKA " The Hammer"https://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0016.jpg9 of 10Forging tongshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0011.jpg4 of 10Transforming the forge hood into a blackboardhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0009.jpg1 of 10Frank warming up his audiencehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0006.jpg5 of 10Rhys assists Frank in forging a hot cuthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_0105.jpg3 of 10Frank getting ready to forge his red hot toes2010-07-10T04:54:48+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/blacksmithing-conference-in-granbergsdal-sweden/https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-086.jpg23 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-084.jpg1 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-083.jpg2 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-079.jpg3 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-076.jpg4 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-066.jpg5 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-060.jpg6 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-059.jpg7 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-054.jpg8 of 24https://gulfcoastblacksmith.com/wp-content/uploads/2009/05/sweden-045.jpg9 of 242010-07-10T04:54:43+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/2009-batson-symposium/https://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_19102.jpg7 of 29Chuck Patrick old time knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_19022.jpg2 of 29Monster bowiehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_19002.jpg4 of 29Tim Potier Damascus bowiehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18962.jpg6 of 29Chuck Patrick Mosaic Damascushttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18952.jpg5 of 29More beautiful Damascushttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18942.jpg1 of 29Damascus folding daggerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18932.jpg3 of 29Steve Schwarzer kniveshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18852.jpg20 of 29Finished knifehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18842.jpg8 of 29Anvil shoothttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dsc_18822.jpg9 of 29Anvil going into low earth orbit2010-07-10T04:54:38+00:00weekly0.6https://gulfcoastblacksmith.com/conferences/2009-fire-in-the-swamp/fire-in-the-swamp-a-great-success/https://gulfcoastblacksmith.com/wp-content/uploads/2009/10/fire-in-the-swap.jpgFire in the Swamp2010-07-10T04:54:19+00:00weekly0.6https://gulfcoastblacksmith.com/smithy-shops/buddys-smithy/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/800px-fema_admin_with_other_officials_preparing_for_gustav.jpgNational NewsFEMA officials announce emergency strategy to repair Buddy's Shophttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/739x600px-gustav_2008_track.pngIntro to 15Path of Hurricane Gustav as it heads right for Buddy's Shophttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/21.jpg15 of 15Norbert and Martial screw in the last piece of tinhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/18.jpg13 of 15Annex tin completedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/07.jpg14 of 15Chimney replacedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_0696.jpg12 of 15Roof tin almost finishedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_0693.jpg7 of 15Annex rafter damagehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_0690.jpg11 of 15New tin https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_0681.jpg10 of 15Inside viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_0677.jpg9 of 15Rafters repaired2010-07-10T04:54:05+00:00weekly0.6https://gulfcoastblacksmith.com/smithy-shops/ed-millers-smithy/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/ed-miller-4.jpg5 of 5Finishing uphttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/ed-miller-3.jpg3 of 5Jason hard at workkhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/ed-miller-2.jpg1 of 5Ed's Smithyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/ed-miller-1.jpg2 of 5Forge is lit and they're ready to gohttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/ed-miller-5.jpg4 of 5Ed in action2010-07-10T04:53:49+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/alligator-bayou-lopa-annual-picnic/https://gulfcoastblacksmith.com/wp-content/uploads/2009/04/arnold-1.jpg1 of 2Carl and Danny demonstrate at Alligator Alleyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/arnold-2.jpg2 of 2Danny hard at it2010-07-10T04:53:27+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/blacksmithing-day-at-the-arboretum/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1475.jpg2 of 8Tom Walker bringing it homehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1474.jpg3 of 8Tom Walker at workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1472.jpg4 of 8Another viewhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1460.jpg5 of 8Tom's work displayhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1452.jpg6 of 8Forge assistanthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1450.jpg7 of 8Tom & Timhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1438.jpg8 of 8Day's endhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/dsc_1477.jpg1 of 8Brick Gas Forge2010-07-10T04:53:22+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2009-blacksmiths/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3540.jpg6 of 14Finished stakehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3534.jpg5 of 14Tim made a jewelers stakehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3516.jpg9 of 14A spike knife takes shapehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3514.jpg8 of 14Norbert strikes for Chuckhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3511.jpg7 of 14Chuck Robinson heats a RR spikehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3433.jpg14 of 14https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3431.jpg3 of 14Lots of folks watched the demonstrationshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3429.jpg2 of 14Brenda showing our display itemshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3416.jpg12 of 14Edgar Gablehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3415.jpg1 of 14GCBA site2010-07-10T04:53:14+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2009-blacksmiths/celtic-festival-2009-jousting-contest/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3559.jpg1 of 7A shattered lancehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3552.jpg2 of 7Chargehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3551.jpg3 of 7Preparing for battlehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3488.jpg4 of 7The knights advance towards each otherhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3466.jpg5 of 7The white knighthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3458.jpg6 of 7Blows are tradedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3565.jpg7 of 7A hit2010-07-10T04:53:08+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2009-blacksmiths/celtic-festival-2009-other-events/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3714.jpg2 of 20Colorshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3696.jpg16 of 20Good throwhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3695.jpg15 of 20The age old question is answeredhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3694.jpg14 of 20Gathering momentumhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3693.jpg13 of 20Initial wind uphttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3692.jpg12 of 20Hammer Throwhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3548.jpg7 of 20Mounted Knighthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3537.jpg18 of 20Pipers gatheringhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3505.jpg19 of 20Pipershttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3498.jpg20 of 20Cloggers2010-07-10T04:53:04+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2009-blacksmiths/celtic-festival-2009-sheep-herding/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3529.jpg9of 9Meg prepares for her Demonstrationhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3528.jpg8 of 9The other dogs are criticizing Slim's techniquehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3527.jpg6 of 9Mental telepthy https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3523.jpg7 of 9Frozen in placehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3522.jpg2 of 9The stalkhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3521.jpg3 of 9Rounding the bendhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3518.jpg4 of 9Listening for his whistle commandhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3517.jpg5of 9The sheep are impressedhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3530.jpg1 of 9Slim the wonder dog2010-07-10T04:52:54+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/celtic-festival-2009-blacksmiths/celtic-festival-2009-sword-fighting/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3676.jpg18 of 25Lord Thomas dispatches the Black Knighthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3675.jpg12 of 25And anotherhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3650.jpg17 of 25Another Coup de grashttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3643.jpg20 of 25and continueshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3642.jpg15 of 25The fight continueshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3641.jpg22 of 25She disables 2 knightshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3639.jpg21 of 25The warrior Princess on the attackhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3638.jpg19 of 25Battle continueshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3623.jpg23 of 25Lots of carnagehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dsc_3620.jpg24 of 25And administers the coup de gras2010-07-10T04:52:50+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/klein-rodeo/https://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-279.jpg1 of 17Cattle penhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-277.jpg5 of 17Rodeohttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-276.jpg3 of 17Livestock at the Rodeohttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-269.jpg6 of 17Dennis Rohner goods on displayhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-252.jpg4 of 17Old tractorhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-225.jpg2 of 17Hit and Miss enginehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-224.jpg7 of 17Old Hit and miss enginehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-223.jpg8 of 17Another Old Hit and miss enginehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-222.jpg9 of 17Another Old Hit and miss enginehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/02/picture-219.jpg10 of 17Old International Harvestor Tractors2010-07-10T04:52:47+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/dennis-rohner-at-kleins-pumpkin-patch/https://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dennis-5-cross-heart-wall-hooks.jpg3 of 5Cross & Heart wall hookshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dennis-4.jpg5 of 5Earingshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dennis-3.jpg2 of 5Dennis' Kniveshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dennis-2.jpg1 of 5The Pumpkin Patchhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/10/dennis-6-cross-nechlaces.jpg4 of 5Cross necklaces2010-07-10T04:52:41+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/george-ohr-festival-2009/https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/tim-lemier-2.jpg9 of 9Tim LeMien at workhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0496.jpg1 of 9Spectators from Nashvillehttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0495.jpg2 of 9Norbert, Phil and Larry https://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0494.jpg3 of 9Buddy, Phil and Norberthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0493.jpg4 of 9Norberthttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0492.jpg5 of 9Johnny Argushttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0491.jpg6 of 9Banging awayhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0490.jpg7 of 9Phil and Johnnyhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/11/dscn0497.jpg8 of 9Betty Leonard2010-07-10T04:52:32+00:00weekly0.6https://gulfcoastblacksmith.com/member-demonstration-events/poplarville-ms-tractor-show/https://gulfcoastblacksmith.com/wp-content/uploads/2009/04/forge-anvil-and-tools1.jpg1 of 5Forge anvil and toolshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dennis-knifes1.jpg2 of 5Dennis' kniveshttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/dennis-items-on-display1.jpg3 of 5Dennis' items on displayhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/an-old-hay-bailer1.jpg4 of 5An old hay bailerhttps://gulfcoastblacksmith.com/wp-content/uploads/2009/04/old-hit-and-miss-engines1.jpg5 of 5Old hit-and-miss engines2010-07-10T04:52:22+00:00weekly0.6https://gulfcoastblacksmith.com/events/maps-and-directions/2010-07-10T04:29:35+00:00weekly0.6https://gulfcoastblacksmith.com/2009/12/21/the-astragal-press-added-to-in-print-resources/https://gulfcoastblacksmith.com/wp-content/uploads/2009/12/scrollsaw_blue.gifEarly Scrollsaw2010-07-10T04:25:49+00:00monthlyhttps://gulfcoastblacksmith.com/2010/04/10/free-online-blacksmith-publications/https://gulfcoastblacksmith.com/wp-content/uploads/2010/04/clinker-breaker.jpgClinker Breaker Newsletterhttps://gulfcoastblacksmith.com/wp-content/uploads/2010/04/clinker-breaker-half-size.jpgclinker breaker.half size2010-07-10T04:25:20+00:00monthlyhttps://gulfcoastblacksmith.com/misc-pages/how-to-email-photo-files-to-be-included-on-the-website/2009-11-28T16:42:22+00:00weekly0.6https://gulfcoastblacksmith.comdaily1.02023-08-27T05:21:45+00:00